Hang your lights with plastic clips that grip the roof edge or slide under the bottom lip of your vinyl siding, and never put a nail, staple or screw through the shingles, siding or trim. Work from a ladder on firm ground instead of walking on the roof, and take the lights down the same way, one clip at a time. In a Rockford December the shingles and vinyl are cold and stiff, so a gentle hand matters more than usual.
A few small holes don’t look like much in December. By the spring thaw, they can be the reason a ceiling has a stain or a trim board has gone soft. Here is how to get the lights up and keep your house in one piece.
Why Even a Small Hole Matters
Shingle makers are blunt about it: any nail, screw or staple through your roofing can lead to leaks. Water runs down a roof all winter long as snow melts and refreezes, and a staple hole sits right in its path. Holes in the wood trim along the roof edge let water into the board, and that is how trim starts to rot. If you inherited a house where the last owner stapled lights every year, look closely at those spots.
On the Roof: Choose the Right Clips
- Use plastic light clips. Hardware stores sell several kinds. Some hook over the edge of the roof, some grip the edge of the shingle at the peak, and some hold the bulb so every light points the same way.
- Pass on the clip styles that slide beneath a shingle tab. A factory strip of sealant glues each shingle down to the course beneath it. Prying a tab up to slide a clip under it can break that bond, and a loose tab is what the wind grabs first. Shingle makers recommend avoiding the tuck under style for exactly this reason.
- Be gentle in the cold. Asphalt shingles get stiff when it is cold out. A tab that bends easily in July can crack in December.
- Stay off the roof. Walking on a cold roof can crack shingles and break the seal between them, and it is slick. Most displays can be hung from a ladder along the edge. If your design needs someone on the roof, that is a job for a pro.
On Vinyl Siding: Clip, Don’t Punch
Vinyl siding has a lip along the bottom of each panel. Siding clips slide up under that lip and hold the strand without a single hole, then lift right back out after the holidays. A few tips:
- Never nail or screw into vinyl. A hole in a panel is permanent, and it gives water a way behind the siding.
- Don’t force a clip. Vinyl gets stiffer in the cold. If a clip won’t slide in, try the next panel instead of prying.
- Keep clips off cracked or loose pieces. If a panel is already cracked or rattles in the wind, leave it alone and have it looked at. Swapping out just the broken pieces is the kind of work on our siding repair page.
- Mind the hot spots. Keep older, hot running bulbs from resting against the siding for hours.
Trim, Fascia and Soffit
The boards along the roof edge are tempting places for a screw hook. Skip it. Use clips or a removable adhesive hook on the face of the house instead, and keep a strand from pulling sideways on the trim. If you find soft wood, flaking paint or a loose board while you are up there, our soffit and fascia repair page explains what we do about it.
Ladder Safety First
- Hang lights on a dry day, never with snow or ice on the ground or the roof.
- Set the ladder on firm, level ground, and have someone with you the whole time.
- Keep the ladder and any metal pole well away from the power lines to the house.
- Use outdoor rated cords, and don’t overload an outlet.
Taking Them Down Without Damage
It is tempting to grab the end of the strand and pull. Don’t. A hard tug can rip clips off the edge of the roof, crack a cold shingle or pull a siding panel loose. Take the lights down one clip at a time, on a mild, dry day if you can wait for one.
Signs Your Lights Left Damage Behind
After the lights come down, take a slow walk around the house and look for:
- Shingle tabs along the edge that are lifted, creased or cracked
- Old staple or nail holes in shingles, siding or trim
- Siding panels that are cracked, bowed or no longer locked together
- Wood trim that is punctured, spongy, or shedding its paint
If you see any of these, call us before the next thaw. Our roof inspection is free, and we can take care of a few damaged shingles with a roof repair in winter. Yes, shingles can be fixed in the cold; winter roof repair shows how we handle it.
Who Will Be on Your Roof
If last year’s display left a mark, Martin Exteriors Roofing & Siding can set it right. Rockford has handed us its vote for best roofing contractor in seven separate years, so you are calling a name your neighbors know. We also hold an A+ grade from the BBB, plus GAF Master Elite status, which less than 2% of roofing contractors have ever reached. Our family has been fixing roofs and siding on Stateline houses since 2006, and you can reach us on (815) 209-9054 whenever you need us, holidays included.
Holiday Lights FAQs
Can I staple Christmas lights to my shingles?
No. Any staple, nail or screw through a shingle can let water in. Plastic light clips hold the strand without making a hole.
Do Christmas light clips damage shingles?
Clips that hook over the roof edge or grip the shingle edge are gentle on a roof. Clips that tuck up under a shingle can break the seal that holds it down, so we suggest skipping that style.
How do I hang lights on vinyl siding without nails?
Use siding clips that slide up under the bottom lip of a panel. They hold the strand without a hole and lift right out after the holidays.
Should I climb up on the roof to put lights along the ridge?
We don’t recommend it. Cold shingles crack and the roof is slick. Hang what you can from a ladder on firm ground and leave the rest to a pro.
Get Your Free Inspection and Estimate
Spotted damage from last year’s lights? Call (815) 209-9054. We’re open 24 hours, or you can request your free inspection and estimate online.